Step 1
1. To power on the Creston Control panel press on the screen and wait for it to warm up
2. Some classrooms will have remotes you can use to power on the projector
a. Press the button on the top left
Step 2
1. To switch inputs press the appropriate button on the control panel
Step 3
2. If you want to play a DVD/Blu-ray disc some computers will have built in DVD/Blu-ray drives.
a. Open the drive by pressing the eject button above the power button
b. If the classroom has an external DVD/Blu-ray drive make sure to change inputs once you have inserted your disc.
Step 4
1. If you want to use your own device classrooms will have cables labeled as either VGA/HDMI (make sure you know if your classroom has the appropriate cable for your device)
a. After you connect your device make sure to change inputs
Step 5
1. To increase volume use “VOL +”, to decrease volume use “VOL -” on the control panel.
Step 6
1. Make sure you log off and turn off the projector with the “System OFF” button on the control panel.
a. If there is a remote press the button on the top left twice to turn the projector off.
Video