Rise Vision Setup

This is the process to set up a Rise Vision media player on the TVs on campus

1. Retrieve the Rise Vision media player box from under the ID Printers
2. Once over to the TV, attach all cords to the media player box
   1. Power cord, antenna, HDMI cable
3. Once the HDMI cable is connected to the TV, change the source to the correct HDMI port.
4. The TV should now bring you through the process of setting up a network connection. (It should be connected to restricted only, get the password from Dejah)
5. You will need to pick a time zone; it should be under Central.
6. Once it is connected, it should then display a code on the screen. You will put the code into your Rise Vision account under the display you created with your content. (pictures shown below). (If you are a student setting this up, give the code to Dejah to input)
7. Once it has been set up, you should then start to see your content running.