Body
Projector instructions
Step 1. To lower the projector screens, click the switch down that is located on the wall.
Step 2. With the remote shown below click the button labeled "on" to power on projectors, you will need to face the projectors to do so. To power them off click the button labeled "off".
Clicker instructions
Step 3. Make sure the USB labeled "do not remove" is inserted into the USB plug, shown below. This is required in order to use the clicker. You will also have to make sure the button above the USB plug is lit up blue, if not press the button to power on.
Speaker Instructions
Step 4. To Increase and decrease the volume on the speakers use the remote shown below.
Webcam instructions
Step 5. To ensure the webcam is powered on press the button above the USB port. When powered on it should turn blue.
Microphone instructions
Step 6. To use the microphone make sure you press the power button shown below, make sure the light is green above the power button to ensure it is powered on.
